Tips for use of car radiators

Car radiator application notes

1: the radiator shall not be touched with any acid, alkali or other corrosive properties.

2: it is advocated that soft and hard water should be used after softening treatment to avoid internal blocking of radiator and occurrence of scale.

3: in the use of antifreeze, in order to avoid the corrosion of the radiator, please must use regular manufacturers and meet the national standards of the long-term antirust antifreeze.

4. In the process of radiator installation, please do not damage the loose belt (piece) and the damaged radiator, in order to ensure the heat dissipation ability and sealing.

5: when water is completely poured into the radiator and then poured into the radiator, the water release switch of the engine cylinder block should be twisted first. When water is discharged, it should be closed to avoid blisters.

6. Check the water level at any time during daily use, and add water after stopping for cooling. When adding water, open the cover of the water tank slowly, the body of the operator should be as far away from the water inlet as possible, in case of high pressure steam oil water inlet spurt to form scald.

Car radiator cleaning process

Step 1: remove the grille

It is not difficult to clean the radiator, it is convenient to operate. Let's repair the car maintenance, wash the car can ask the operation personnel to help clean and even start to clean themselves. The first step, of course, is to remove the front grille. Because the radiator is set inside the front grille, removing the front grille is the first process. Because of the difference on the plan of each model, single model can only expose a small part of radiator even after removing grille, so cleaning up will be relatively time-consuming.

Step 2: air pump cleaning

If radiator exterior has the bigger sundry such as branch leaf, can undertake arranging with the hand first, if do not have, can depend on air pump undertakes arranging directly (there are a lot of small air pump on market at present, or depend on car wash medium air pump can). Air pump cleaning must pay attention to, if the conditions allow, try to use the air pump from inside the engine room to outside cleaning, this method can make sorted out dust debris was blown directly to the outside of the car, and will not fly into the engine room. Of course, every car has a different internal structure. Some cars can't get the air pump in from the inside, so they have to be cleaned from the outside. A lot of time even if the long-term not clean, from the appearance, the radiator is not very dirty. Consequently a lot of friends can be cheated by its outward appearance place, in fact radiator interior already accumulated a lot of dirt, blow with air pump can diffuse come out. Blow it again and again until no dust comes out and the cleaning is complete.

Step 3: washing (not recommended)

In fact, to the last step, the whole cleaning process is basically completed, although many of the radiator cleaning mentioned the water gun cleaning, but generally do not advocate to use the water gun cleaning. One is because through the air pump has been able to reach the role of cleaning, and the other is because the pressure of the gun itself is larger, slightly do not pay attention to the simple radiator fin dozen slanting, but will affect the role of heat dissipation. Of course there are some perfect-minded car owners who feel that they don't have to wash completely. If be so, that must go to regular wash car room undertakes cleaning, and when cleaning water gun wants to enter radiator decently, viewpoint does not be crooked, avoid to hit crooked radiator viewpoint.

How to avoid car radiator "boiling"

In the hot summer days, the sun is hot and the temperature is rising. Such a high temperature condition, the car's water temperature simply sharply increased, the formation of the "pan", the owners of friends should be ready for the car in advance to cool down. But what about cars?

View cooling system

Car owner friends should often check the cooling system, do its maintenance work, to ensure the sensitivity of radiator, fan and other parts.

Clean water tank appearance

If the accumulation of excessive dust and other impurities in the surface of the water tank, will seriously affect the cooling function of the water tank, so should promptly clean up the sewage outside the water tank.

The tank needs to be filled with water

The owner should check whether the water tank is short of water and fill it up in time before going out every day. You can also store a bucket of water in the trunk for a rainy day.

Check the water temperature as you go

If the owner of friends to long-distance or long-term travel, should pay attention to the investigation of water temperature in the process of travel, if the water temperature is too high, should be parked to a safe place to rest.

Traffic jam off air conditioning

Each car owner friends can be in the middle of the traffic will turn off the air conditioning, thereby reducing the speed of rising water temperature, avoid the car "boiling".

Use hot air to cool the air

If the car has a "boiling" phenomenon, the owner can adjust the air conditioning to the external circulation, hot air condition, this approach can help the engine to quickly cool down.

Tips: should check the cooling system regularly, clean the appearance of the water tank, and fill the water tank with water; When traveling to pay attention to the investigation of water temperature, turn off the air conditioning when the traffic jam, in case the car "boiling"; If it is already "boiling", use hot air to cool it down.

Automobile radiator excavator tank oil radiator engineering machinery radiator